|
|
|
|
|
|
|
|
|
|
|
|
|
|
REAR COMBO LIGHT BULB --- 12 VOLT
|
TAIL LIGHT BULB --- 6 VOLT
|
TAIL LIGHT BULB --- 12 VOLT
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
REAR COMBO LIGHT BULB --- 6 VOLT
|
SEALED BEAM BULB
|
7" HEADLIGHT CORK GASKET
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DISTRIBUTOR DUST COVER WITH FELT GASKET & WASHER
|
SEALED BEAM LIGHT BULB
|
HEADLIGHT REFLECTOR
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
UNIVERSAL OIL PRESSURE GAUGE (80 LB)
|
AMMETER (20-0-20)
|
2-WIRE KEY SWITCH WITH 2 KEYS
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
HEADLIGHT REFLECTOR
|
Autolite Prestolite Distributor Dust Cover Fits IAD 6012 and IBT 4101 4102 4105 4201 4301 4402 4403 4405 4406 4706 4801 6101 6201 6403 6404 6405 6703 and IDD 4102 4103 4104 4106 and possibly others. This part has been discontinued and is available only till stock on hand runs out.
|
STARTER SWITCH
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
UNIVERSAL AMMETER GAUGE (30-0-30)
|
7" HEADLIGHT RING
|
BATTERY CABLE
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BATTERY CABLE
|
Key switch can work on various Allis Chalmers Avery Case Cockshutt David Brown Ford IH / Farmall John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver and other AG and light industrial equipment 3/4" Dia thread, 4 terminals 4 position switch, has 4 stud terminals accessory/off/on(ignition)/start(spring loaded) ABC400 , check mounting dimensions and switch functions before ordering
|
BATTERY CABLE
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SPARK PLUG WIRING SET
|
UNIVERSAL OIL PRESSURE GAUGE
|
MAGNETO PUSH-PULL IGNITION SWITCH
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
6-VOLT DASH LIGHT W/ BULB
|
DASH LIGHT W/ BULB
|
Starter switch replaces Delco 1838394, 1857273, 1857519, 1886633, 1919745, 1923490 Replacement #'s SDR6080 240-12010 According to literature it is used on Delco 1107513 1107570 1108610 1108625 1108940 1109114 1109158 1109169 1109170 1109179 1109225 1109229 1109233 1109236 1113010 1113311 1113312 1113331 1113332 1113602 1113607 1113615 1113620 1114036 Delco 488 587 705 may fit others
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
63 AMP ALTERNATOR W/ PULLEY
|
This alternator can be used only on 12V negative ground systems. This mini alternator is preferred for tractors requiring a smaller diameter alternator for clearance. The alternator housing measures about 4-1/2” in diameter and includes a 2-1/2” diameter pulley with a 3/8” belt width. For other belt widths you'll need to change the pulley before installation. The outside diameter of the shaft for the drive pulley measures 0.590”. This alternator is brand new and is not rebuilt. It has a maximum output of 35-40 amps. For Farmall Cub use IHS2340 bracket kit. Mounting may need to be modified or fabricated, if not original and a suitable bracket for your application is not available.
|
|
|
